Filter
Top Products
5
Connecting to a Novell NetWare 5.0 Server
Microsoft Windows 95 SR2.5
12 Select either “Typical” or “Custom” and click on “Install”. Typical
Installation is normally chosen. Select Custom Installation only if you are
an administrator or an advanced user. When prompted for options during
installation, ask your Network Administrator for more information.
13 Click on “Reboot” once the Novell client installation is complete.
Known Problems
Problem 1
Windows 95 will automatically select the driver (E100BNT5.SYS-NDIS 5
driver) for the “Intel PRO/100B PCI adapter”, from the Intel driver diskette
during installation. This driver will not successfully install in Microsoft
Windows 95 SR2.5. A yellow exclamation mark in Device Manager will
appear next to the NIC device. To fix this problem the E100BNT.SYS-NDIS 4
driver must replace the NDIS 5 driver
To fix this problem:
1 Double-click on the NIC device in device manager.
2 Double-click on “Intel PRO/100B PCI adapter (TX)”.
3 Select the “Driver” tab and click on “Update Driver…”
4 Select “No, select driver from list”.
5 Insert the driver disk and click on “Have Disk…”
6 Type in the location of the driver disk and click on “OK”.
7 Select “Show all devices”.
8 Select “8255x-based PCI Ethernet adapter (10/100)” from the list and
click “OK”.
9 Type in the location of the driver disk and click on “OK”.
10 Click on “Yes” when prompted to keep an existing file.
11 Click on “Yes” to restart the system.
Pro100B.book Page 5 Friday, December 10, 1999 4:02 PM