Filter
Top Products
Removal and replacement procedures 26
4.
Disconnect the hard drive cables.
5. Remove the hard drive ("Hard drive" on page 24).
6. Remove the DIMM baffle.
To replace the component, reverse the removal procedure.
DIMMs
To remove the component:
1. Power down the server blade (on page 23).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Disconnect the hard drive cables from the system board.
5. Remove the DIMM baffle ("DIMM baffle" on page 25).