Filter
Top Products
HP PSC 500 Setup Guide
1-15
13
If prompted, restart your computer.
If you plan on scanning text to edit, make sure you install the Readiris OCR
software. Refer to the section,“Installing OCR Software.”
To take the tour at any time, do the following:
1
Insert the HP PSC 500 CD-ROM into your computer’s CD-ROM drive.
2
From the HP PSC 500 Essentials menu, click Run Product Tour.
TIP
You can also access the tour from the Welcome tab on the toolbox.
Registering Your HP PSC 500
The first time you restart your computer after installing the HP PSC 500
software, you will be invited to register your unit electronically. The
information you provide to HP is confidential and is used to help us improve
our products.
Installing OCR Software
To scan text to edit, you must install the Readiris OCR software program.
1
Insert the HP PSC 500 CD-ROM into your computer’s hard drive.
2
From the HP PSC 500 Essentials menu, click Readiris OCR.
3
Follow the directions in the Readiris software installation window.
Installing Third-Party Programs
Your HP PSC 500 may include additional third-party programs. Install these
programs to enhance your HP PSC 500’s capabilities.
WLSG.book Page 15 Thursday, March 9, 2000 2:26 PM