Filter
Top Products
2-4
Sharing HP PSC 500 on a Network
Setting Up a Peer-to-Peer Client (95/98 server to NT 4.0 client)
If you are using a configuration that includes a 95/98 server with an NT 4.0
client, follow these steps to install the printing software on each NT 4.0 client.
1
Set up the server by following the steps outlined earlier under “Setting
Up the Server.”
2
In the first Add Printer Wizard dialog box, select My Computer, and
click Next.
3
In the next dialog box, click New Port.
4
In the Printer Ports dialog box, choose Local Port, and click New Port.
5
In the Port Name dialog box, type in the name of the server to which the
HP PSC is connected and the share name assigned to the printer.
6
Click OK to close the Port Name dialog box and store your changes, and
then click Close on the Printer Ports dialog box.
7
In the Available Ports list, verify that the newly created port exists, and
then click Next.
8
Click Have Disk, and insert the HP PSC software CD.
9
If the HP PSC 500 Essentials menu appears, click Quit.
10
Change the name of the drive letter to point to your CD-ROM drive, and
click Browse.
WLSG.book Page 4 Thursday, March 9, 2000 2:26 PM