Filter
Top Products
●
If you are installing the drive in the upper bay (bay 4), install three standard 6-32 silver guide
screws (two on the right side and one on the left side in the screw hole closest to the power
and data connectors).
Figure 6-26 Installing Standard Guide Screws
4. Insert the hard drive into the bay as follows:
CAUTION: Make sure the guide screws line up with the guide slots in the drive cage. The use of
unnecessary force when installing any drive into the drive bay may result in damage to the drive.
●
If you are installing a hard drive into one of the lower two bays (bays 5 and 6), slide the
hard drive into the drive bay until it locks. The drivelock automatically secures the drive in the
bay.
Figure 6-27 Installing a Hard Drive into the Lower Two Bays
Drives
101