Filter
Top Products
Before removing the webcam module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display bezel (see
Display bezel on page 77).
Remove the webcam module:
1. Disconnect the webcam cable (1) from the display enclosure.
2. Remove the webcam module from the display enclosure (2).
Reverse this procedure to install the webcam module.
Top cover
Description Spare part number
Top cover (includes TouchPad) 652536-001
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 45).
5. Remove the service access cover (see
Service access cover on page 46).
Component replacement procedures 81