Filter
Top Products
Speakers
Description Spare part number
Speaker 652669-001
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 48).
5. Remove the service access cover (see
Service access cover on page 50).
6. Remove the following components:
a. Hard drive (see
Hard drive on page 60)
b. Optical drive (see
Optical drive on page 65)
c. Keyboard (see
Keyboard on page 67)
d. Top cover (see
Top cover on page 71)
e. Video card fan/heat sink assembly (see
Video card fan/heat sink assembly on page 84)
f. Processor heat sink (see
Processor heat sink on page 86)
g. Processor (see
Processor on page 90)
h. Modem module (see
Modem module on page 92)
i. Audio/USB 3.0 board (see
Audio/USB 3.0 board on page 94)
Remove the speakers:
1. Position the computer right-side up, with the front toward you.
2. Remove the display latch:
a. Remove the spring (1) from the display latch lock.
b. Remove the three Phillips M2.0×2.0 screws (2) from the display latch lock.
c. Push down the button (3) in the front right corner of the display latch lock.
96 Chapter 4 Removal and replacement procedures