Filter
Top Products
Front
Component Description
(1) Wireless light
●
White: An integrated wireless device, such as a wireless
local area network (WLAN) device and/or a Bluetooth®
device, is on.
● Amber: All wireless devices are off.
(2) Power light ● On: The computer is on.
●
Blinking: The computer is in the Sleep state.
●
Off: The computer is off or in Hibernation.
(3) Battery light
●
Amber: A battery is charging.
● White: A battery is close to full charge capacity.
● Blinking amber: A battery that is the only available power
source has reached a low battery level. When the battery
reaches a critical battery level, the battery light begins
blinking rapidly.
●
Off: If the computer is plugged into an external power
source, the light turns off when all batteries in the computer
are fully charged. If the computer is not plugged into an
external power source, the light stays off until the battery
reaches a low battery level.
(4) Drive light
●
Blinking white: The hard drive or optical drive is being
accessed.
● Amber: HP 3D DriveGuard has temporarily parked the hard
drive.
(5) Display release latch Opens the computer.
(6) Media Card Reader Supports the following digital card formats:
● MultiMediaCard
●
MultiMediaCardplus (MMC+)
●
Secure Digital (SD) Card
● Secure Digital HC (SDHC) Card
●
Secure Digital XC (SDXC) Card
(7) Speakers (2) Produce sound.
NOTE: To use the SRS Premium Sound software, select Start
> All Programs > SRS Premium Sound.
12 Chapter 2 External component identification