Filter
Top Products
RPC SERIES OWNER’S MANUAL
INSTALLATION
________________________________________________________________________________
12
INSTALLATION
UNPACKING
Compare the unit and serial number of the equipment you received to the
packing slip located on the outside of the box. Log this information on the
sheet on page 60. Inspect equipment carefully for damage that may have
occurred in shipment. If there is damage to the equipment or if materials
are missing, contact BayTech technical support at 228-467-8231 or call
toll free inside the United States at 800-523-2702. At a minimum, you
should receive the following:
a.
The RPC unit.
b.
This manual with any applicable addendum’s.
c.
Power Cords (4 with RPC-5) (1 with RPC2A/RPC3A).
d.
1 ea. DE-9 (9 pin) PC com port adapter -- 9FRJ45PC-1.
e.
1 ea. RJ-45 cross over cable -- RJ08X007.
f.
1 ea. RJ-11 telco cable -- RJ04X007 (RPC-2 MD01 &
RPC-2 RDR).
g. 1 ea. external modem adapter -- 25MRJ45MD-8 (RPC-2
RDR).
NOTE:
Keep the shipping container and packing material in the
event future shipment is required.
PREPARING THE INSTALLATION SITE
The installation area should be clean and free of extreme temperatures and
humidity. Allow sufficient space behind the RPC unit for cabling and
receptacle connections.