HP (Hewlett-Packard) RX7620-16 Server User Manual


 
Figure 15. Basic core I/O card set (secondary)
The Management Processor—The Management Processor (MP) is a dedicated processor located on
each MP/SCSI card that simplifies and extends system management and enhances serviceability. The
MP reduces or eliminates the need for the system administrator to be physically at the system to
perform tasks such as diagnostics, system management, or even hard resets. Following are some of
the features offered by the Integrity rx7620-16 and rx8620-32 Server Management Processor:
System management over the Internet or intranet
System console redirection
Console mirroring
System configuration for automatic restart
Viewing history log of system events
Viewing history log of console activity
Setting MP inactivity timeout thresholds
Remote system control
Remote power cycle (except for MP housekeeping power)
Viewing system status
Event notification to system console, e-mail, pager, and/or HP Response Centers (e-mail and pager
notification work in conjunction with HP Event Monitoring Service [EMS])
Automatic hardware protection of critical environmental problems
Access to management interface and consoles on WAN failure (modem required)
Automatic system restart
Remote resetting of hardware partitions
Forward progress indicator (via a virtual front panel)
Out-of-band manageability and processor-dependent code (PDC) firmware update
Configuration of manageability and console security
MP failover (systems with both core I/O boards)
Secure Sockets Layer (SSL)
20