Filter
Top Products
14 Front Panel, Model S10 Short-Wave Hub
Front Panel, Model S10 Short-Wave Hub
The front panel contains LEDs for monitoring power, fault, and port status. The RS-232
port is provided to configure and troubleshoot the hub and to upgrade its firmware. The
10Base-T port provides an ethernet connection if you choose to manage the hub with Fibre
Channel Manager.
The Reset button resets the internal control microprocessor of the hub. Pushing the Reset
button also forces loop initialization on all devices in the loop.
Figure 1 Front Panel Display, Short-Wave Hub
1 Power LED 7 10Base-T port
2 Fault LED 8 10Base-T Status LED
3 Reset button 9 MAC address
4 Fibre Channel connector (Port 1 indicated) 10 RS-232 port
5 Port LED (Port 1 indicated) 11 AC power connector
6 FC-AL short-wave ports and Port LEDs
1
3
2
4
5
6
7
10
11
9
8