Filter
Top Products
3–Inch
Core
Adaptors
Media Hub
Assembly
Thumbscrews
Media
Supply Roll
Media
Retainer
Media Hub
Assembly
Rewind Hub
unloading media
15Operator’
s Guide
6 To remove roll–fed media, proceed as
follows:
a.
Roll the media onto the media hub or
onto the rewind hub, as appropriate.
b. If you have rolled the media onto the
media hub
, slide the roll of media of
f
the hub.
c. If you have rolled the media onto the
rewind hub, lower the lower
right-hand front panel.
Unroll the media from the hub, and
remove the clasp
d. Lift and snap the lower right-hand
front panel closed.
7 To remove fan–folded media, proceed
as follows:
a. If the rewind hub was
not
being
used, simply pull the media through
the loading slot and out of the
printer.
Go on to step 8
.
b.
If the
rewind hub was being used,
finish rolling the media onto the
hub.