Filter
Top Products
Top cover
Description Spare part number
Top cover (includes TouchPad and TouchPad cable, caps lock light board and cable, and top
cover bumper pads)
592964-001
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove the battery (see
Battery on page 35).
5. Remove the hard drive (see
Hard drive on page 37).
6. Remove the memory cover (see
Memory module on page 40).
Remove the top cover:
1. Remove the two front rubber feet (1). The computer feet are available in the Rubber Kit, spare part
number 592966-001.
2. Remove the 17 Phillips PM2.5×6.0 screws (2) that secure the top cover to the computer.
48 Chapter 4 Removal and replacement procedures ENWW