Filter
Top Products
3. Remove the fan/heat sink assembly (3).
NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink
assembly and system board components, it may be necessary to move the fan/heat sink assembly
from side to side to detach the assembly.
NOTE: The thermal material should be thoroughly cleaned from the surfaces of the fan/heat sink
assembly (1) and the system board components (2) each time the fan/heat sink assembly is removed.
Replacement thermal material is included with all system board, fan/heat sink assembly, and processor
spare part kits.
Reverse this procedure to install the fan/heat sink assembly.
Component replacement procedures 65