Filter
Top Products
5–4 Maintenance and Service Guide
Removal and Replacement Procedures
5.3 Preparing the Computer for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the computer. If you are unsure whether the
computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
Section Description
# of Screws Removed
5.11 Display Assembly 4
5.12 Base Enclosure HP Pavilion dv1000 = 19
HP Compaq nx4800 and
Compaq Presario V2000 = 18
5.13 USB/S-Video Controller Board 2
5.14 Speaker Assembly 0
5.15 RTC Battery 0
5.16 Menu Control Button Board 4
5.17 Heat Sink 3
5.18 Fan 2
5.19 Processor 0
5.20 System Board 4
5.21 LED Board HP Pavilion dv1000 = 3
HP Compaq nx4800 and
Compaq Presario V2000 = 2
Disassembly Sequence Chart
(Continued)