Filter
Top Products
HP vc4815 Series Setup (F10) Utility
vc4815 Series Setup Utility (Continued)
Heading Option Description
System Date Allows you to set the date
System Time Allows you to set the time.
IDE channel 0
Master
IDE Channel 1
Master
Indicates ATA Flash settings
Standard
CMOS
Features
Halt on Allows you to select system response
when POST Error has been detected.
Quick Power
On Self Test
Allows the system to skip certain tests
while booting so the unit has a faster
boot.
Hard Disk Boot
Priority
Allows Setting of ATA Flash Disk or
Bootable Add-in Cards Boot Priority
First Boot
Device
Select Boot Device Priority. The default is
set to Hard Disk.
Second Boot
Device
Select Boot Device Priority
Third Boot
Device
Select Boot Device Priority
Boot other
Device
Enable/disable boot from other device
Bootup
NumLock
Status
Select Power On state for NumLock.
Advanced
BIOS
Features
Security
Option
Select whether the Password is required
every time the system boots or only when
you enter Setup.
✎Support for specific Setup options may vary depending on your
hardware configuration.
Service Reference Guide
www.hp.com 3-3