Filter
Top Products
DescriptionItem
The license type: Permanent, Temporary or Emergency. Not Installed is displayed, when the
option is not installed. Since all the SLPRs will be available when the key type of the program
product is Temporary or Emergency, you do not need to separate each SLPR. Therefore, no
partition status information for the program product whose key type is Temporary or Emergency
will be displayed in the License Key Partition Definition window, so that you cannot partition
the SLPR for that program product.
Unlimited is displayed if the size is unlimited.
Key Type
Capacity Information:
• Available capacity (licensed capacity). Licensed capacities are calculated assuming that
1 KB = 1,024 bytes, 1 MB = 1,024 KB, 1 GB = 1,024 MB, and 1 TB = 1,024 GB.
• Capacity that is already being used. For example, if this column shows 10.0 TB (2.50 TB),
the licensed capacity is 10.0 TB and the capacity already being used is 2.50 TB.
• Unlimited is displayed if the size is unlimited.
Permitted
Volumes
The number of days that remain before temporary or emergency key expiration. After the
temporary key has expired, this column shows the number of days that remain before you can
re-install the temporary key.
Term (days)
The option's current status:
• Installed indicates that the option is available. The Product Name column displays the In-
stalled icon ( ).
• Not Installed indicates that the option is not available. The Product Name column displays
the Not Installed icon ( ).
• Not Enough indicates that the volume capacity is insufficient. The Product Name column
displays the Not Installed icon ( ).
• Capacity Insufficient indicates that the licensed capacity is insufficient because disk drives
have been added. The Product Name column displays the Installed icon ( ), but you
must purchase additional licensed capacity before the license key expires.
• Expired indicates that the license key of an option that had been in the Capacity Insufficient
status has expired. The Product Name column displays the Not Installed icon ( ).
• Time Out indicates that the term has already expired for the temporary key. The Product
Name column displays the Not Installed icon ( ).
Status
When you select an option, the capacity list, which is directly under the Product Name list, is updated
(see Figure 11).
Figure 11 Capacity List
.
Table 7 Capacity List Details
DescriptionItem
Total licensed capacity for the selected option.Total Capacity
The remaining licensed capacity (in GB) that is not yet allocated to any
SLPR among the entire licensed capacity for the selected option.
Remaining Capacity
Using the XP Disk/Cache Partition GUI26