Hitachi 42HDM12A Computer Monitor User Manual


 
14
REAR PANEL JACKS
COMPOSITE VIDEO Input
By using the VIDEO button of the remote control, you can select Composite video source. Use the audio and video inputs to connect
external devices, such as VCRs, camcorders, laserdisc players, DVD players etc.
AUDIO Output
These jacks provide fixed audio signal which are used for recording. (If you have mono sound, insert the audio cable into the left(L)
audio jack).
VIDEO Output
This jack provides Composite video signals which are used for recording. S-VIDEO, Component signal, Analog RGB and HDMI
inputs do not have VIDEO output.
ANALOG RGB/HDMI Audio Input
Connect audio for ANALOG RGB and HDMI input.
SUBWOOFER Output
Connect this SUB WOOFER OUT output to the external audio component input.
HDMI - Digital Input
About HDMI
HDMI is the next-generation all digital interface for consumer electronics. HDMI enables the secure distribution of uncompressed
high-definition video and multi-channel audio in a single cable. Because digital television (DTV) signals remain in digital format, HDMI
assures that pristine high-definition images retain the highest video quality from the source all the way to your monitor screen.
Use the HDMI input for your external devices such as Set-Top-Boxes or DVD players equipped with an HDMI output connection.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
ANALOG RGB Input
Use this 15-pin D-Sub input for your external devices with RGB output using the D-Sub Mini 15-pin cable provided.
NOTES: 1. The HDMI input is not intended for use with personal computers.
2. Only DTV formats such as 1080i, 720p, 480i and 480p are available for HDMI input.
NOTES: In case of using analog audio, when connecting with DVI-HDMI transformation connector, use ANALOG RGB/HDMI
audio terminal for input.