Filter
Top Products
21
English
Français
TIPS ON REAR PANEL CONNECTIONS
• S-VIDEO, Y-P
B
P
R
or HDMI connections are provided for high performance laserdisc players etc. that have this feature. Use these
connections in place of the standard video connection if your device has this feature.
• If your device has only one audio output (mono sound), connect it to the left(L) audio jack on the monitor.
• Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up cables.
• Connect only 1 component (VCR, DVD player, camcorder, etc.) to each input jack.
• COMPONENT: Y-P
B
P
R
connections are provided for high performance components, such as DVD players and set-top-boxes. Use
these connections in place of the standard video connection if your device has this feature.
• Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the monitor’s P
B
input
and the components R-Y output to the monitor’s P
R
input.
• Your component outputs may be labeled Y- C
B
C
R
. In this case, connect the components C
B
output to the monitor’s P
B
input and the
components C
R
output to the monitor’s P
R
input.
• It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-P
B
P
R
inputs.
• To ensure no copyright infringement, the VIDEO OUT output will be abnormal, when using the Y-P
B
P
R
, RGB and HDMI input jack.
• VIDEO output may be used for recording only when the input is of Composite Video type.
• When using a HDMI input from a Set-Top-Box, it is recommended to use a 1080i or 720p input signal.