Hitachi CP-S225W Computer Drive User Manual


 
ENGLISH-22
SPECIFICATIONS
SPECIFICATIONS
Table 12. Specifications
This specifications are subject to change without notice.
NOTE
Item Specification
Product name Liquid crystal projector
Liquid
crystal
panel
Panel size 1.8 cm (0.7 type)
Drive system TFT active matrix
Pixels
CP-S225W : 480,000 pixels (800 horizontal x 600 vertical)
CP-X275W : 786,432 pixels (1024 horizontal x 768 vertical)
Lens Zoom lens F=2.0 ~ 2.3 f=18 ~ 21 mm
Lamp 150 W UHB
Speaker 1.0 W
Power supply AC100 ~ 120V, 2.7A / AC220 ~ 240V, 1.3A
Power consumption 240 W
Temperature range 0 ~ 35°C (Operating)
Size 289 (W) x 84 (H) x 215 (D) mm
Weight (mass)
CP-S225W : 2.4 kg
CP-X275W : 2.5 kg
RGB
signal
input
RGB IN
Video: Analog 0.7Vp-p, 75terminator (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
D-sub 15-pin shrink jack
AUDIO IN
200mVrms, 47 k(max. 3.0Vp-p)
Stereo mini jack
Video
signal
input
VIDEO
1.0Vp-p, 75terminator
RCA jack
S-VIDEO
Brightness signal: 1.0Vp-p, 75terminator
Color signal: 0.286Vp-p (NTSC, burst signal), 75terminator
0.3Vp-p (PAL/SECAM, burst signal), 75terminator
Mini DIN 4-pin jack
COMPONENT
VIDEO
Y 1.0 Vp-p, 75 Terminator (Positive)
CB/CR 0.7 Vp-p, 75 Terminator (Positive)
PB/PR 0.7 Vp-p, 75 Terminator (Positive)
AUDIO
L
200mVrms, 47 k(max. 3.0Vp-p)
RCA jack
R
Control
functions
CONTROL D-sub 15-pin shrink plug
Optional Parts
Lamp: DT00401 (CP-S225W) / DT00461 (CP-X275W)
Air Filter: MU01461
* For others, consult your dealer.