Hitachi CP-S317 Projector User Manual


 
8
Display monitors
DVD players
VCRs
Laptop computers
Desktop computers
Indicates the
corresponding
reference page
ATTENTION
Precautions to observe when connecting other devices to the projector
Whenever attempting to connect other devices to the projector, please thoroughly
read the manual of each device to be connected.
TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to
connect a live device to the projector may generate extremely loud noises or other
abnormalities that may result in malfunction and/or damage to the device and/or
projector. Refer to the TECHNICAL of the USERS MANUAL (Vol.2) for the pin
assignment of connectors and RS-232C communication data.
Make sure that you connect devices to the correct port. Incorrect connection may
result in malfunction and/or damage to the device and/or projector.
A component cable and some other cables have to be used with core set. Use the
accessory cable or a designated-type cable for the connection. For cables that have
a core only at one end, connect the core to the projector.
Secure the screws on the connectors and tighten.
CONNECTING YOUR DEVICES
Devices You Can Connect to the Projector
(Refer to this section for planning your device
configuration to use for your presentation.)
CAUTION Incorrect connecting could result in fire or electrical shock. Please
read this manual and the separate SAFETY INSTRUCTIONS.