Filter
Top Products
46
3. Management with Web browser software
3.7 Controlling the external devise via the projector
(using the NETWORK BRIDGE function)
This projector is equipped with the NETWORK BRIDGE function to perform
mutual conversion of a network protocol and a serial interface.
Using the NETWORK BRIDGE function, a computer that is connected with
this projector by Ethernet communication can control an external devise that is
connected with this projector by RS-232C communication as a network terminal.
3.7.1 Connecting devices
1) Connect the projector’s
LAN
LAN port and the computer’s LAN port with a LAN
cable, for Ethernet communication.
2) Connect the projector’s
CONTROL OUT
CONTROL OUT port and the device’s RS-232C port
with an RS-232C cable, for RS-232C communication.
• Before connecting the devices, read the manuals for the devices to
ensure the connection.
For RS-232C connection, check the specifi cations of each port and use the
suitable cable. (
Operating Guide - Technical - Connection to the ports)
NOTE
RS-232C
RS-232C cable
CONTROL OUT
CONTROL OUT port
LAN
LAN port
External devise
Ethernet
LAN cable
Computer
Protocol change
TCP/IP data Serial data