Filter
Top Products
52
3. Management with Web browser software
3.8.4 COMMUNICATION GROUP / COMMUNICATION ID
3.8.5 Command for Daisy Chain control
When controlling some projectors in the DAISY CHAIN, to control a projector
individually or some projectors in a group simultaneously, set up the
COMMUNICATION GROUP and COMMUNICATION ID for each projector.
Use the COMMUNICATION GROUP menu and COMMUNICATION ID
menu to set up them. (
Operating Guide - OPTION menu - SERVICE –
COMMUNICATION – COMMUNICATION GROUP / COMMUNICATION ID)
For the command control of the DAISY CHAIN function, see the Technical
part of the Operating Guide. (
Operating Guide - Technical – Daisy Chain
Communication)
• The COMMUNICATION GROUP is set to A, and the
COMMUNICATION ID is set to the 1, as the default settings.
• To control some projectors individually, do not set up the same
COMMUNICATION ID to these projectors.
Alternatively, setting up the same COMMUNICATION ID to two or more
projectors intentionally realizes simultaneous control for these projectors, like
the coincident control with the COMMUNICATON GROUP.
NOTE