Hitachi CP-X1230 Projector User Manual


 
11
Setting Up (continued)
Setting Up (continued)
AUDIO IN 1
AUDIO IN2
RGB
RGB OUT
REMOTE CONTROL
AUDIO OUT
C
R/PR
CB/PB
CONTROL
R - AUDIO IN - L VIDEO IN
S-VIDEO IN
Y
R/C
R/PR
G/Y
B/C
B/PB HV
BNC
B
AUDIO IN 1
AUDIO IN2
RGB
RGB OUT
REMOTE CONTROL
AUDIO OUT
C
R/PR
CB/PB
CONTROL
R - AUDIO IN - L VIDEO IN
S-VIDEO IN
Y
R/C
R/PR
G/Y
B/C
B/PB HV
BNC
G
Monitor Projector
RGB in RGB cable RGB OUT
Connecting to a monitor
Speaker Projector
Connecting to a speaker (with amplifier)
Audio in Stereo Mini cable AUDIO OUT
G
B
WARNING
Use extra caution when connecting the power cord as incorrect or faulty
connections may result in fire and/or electrical shock. Please adhere to the “User’s manual –
Safety Guide” and the following.
Only plug the power cord into outlets rated for use with the power cord’s specified voltage range.
Only use the power cord that came with the projector. If it is damaged, contact your dealer to
newly get correct one.
Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.
Make sure that you firmly connect the power cord to the projector and wall outlet.
1
Connect the connector of the power cord to
the AC inlet of the projector.
2
Firmly plug the power cord’s plug into the
outlet.
AC Inlet
Connector Plug
Outlet
Connecting The Power Supply