Hitachi CP-X1230 Projector User Manual


 
15
VIDEO
RGB
SEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO
BLANK
MUTE
VOLUME
KEYSTONE
POSITION
ESC
ENTER
MENU
RESET
ZOOM
+
-
FOCUS
+
-
PinP
Operating
Operating
Selecting An Input Signal
Select an input signal.
Turn the INPUT dial of the projector.
Turning the dial cycles through the input ports as
shown below. Select the signal you wish to project.
RGB BNC
S-VIDEO
COMPONENT
VIDEO
RGB BNC
S-VIDEO
COMPONENT
VIDEO
STANDBY/ON
MENU
TEMP LAMP
KEYSTONE
SEARCH
RESET
INPUT
VIDEO
S-VIDEO
COMPONENT
RGB
BNC
ENTER
Using the INPUT dial
Press the SEARCH button of the projector or the
remote control.
Pressing the button automatically cycles through input
ports and displays the picture of retrieved signal.
memo
If no signal is found or the projector is unstable to
find an input signal at any of its ports, it will turn to the state
it was in prior to the search.
Using SEARCH button
Press the RGB button of the remote control.
Pressing the button toggles between the RGB ports
as shown below Select the signal you wish to project.
Press the VIDEO button of the remote control.
Pressing the button toggles between the VIDEO ports
as shown below Select the signal you wish to project.
RGB BNC
S-VIDEO VIDEOCOMPONENT
INPUT dial
SEARCH button
VIDEO button
RGB button
SEARCH
button
ZOOM
buttons
FOCUS
buttons
ZOOM
FOCUS
Use the FOCUS buttons to adjust the focus.
Use the ZOOM buttons to adjust the screen size.
Using RGB button
Using VIDEO button
2
3
1