Hitachi CP-X255 Projector User Manual


 
55
Warranty And After-Service
Warranty and after-service
If a problem occurs with the equipment, first refer to the “Troubleshooting” and run
through the suggested checks. If this does not resolve the problem, please contact your
dealer or service company. They will tell you what warranty condition is applied.
Specifications
Specifications
NOTE • These specifications are subject to change without notice.
Item Specification
Product name Liquid crystal projector
Liquid
Crystal
panel
Panel size 1.5 cm (0.6 type)
Drive system TFT active matrix
Pixels
CP-S245 : 480,000 pixels (800 horizontal x 600 vertical)
CP-X255 : 786,432 pixels (1024 horizontal x 768 vertical)
Lens Zoom lens F=1.7 ~ 1.9 f=18.9 ~ 22.6 mm
Lamp 180W UHB
Speaker 1W x 1
Power Supply AC100-120V/3.1A, AC220-240V/1.7A
Power Consumption 290W
Temperature range
5 ~ 35°C (Operating)
Size
306 (W) x 86 (H) x 249 (D) mm
(Not including protruding parts)
• Please refer to the following figure.
Weight (mass)
3.0 kg
Ports
Optional
parts
Lamp DT00731
Air filter
NJ22222
Others • Please consult your dealer.
RGB input:
RGB IN1 ..D-sub 15pin mini x1
RGB IN2 /OUT
D-sub 15pin mini ................x1
(select RGB IN2 or RGB OUT)
Audio input:
AUDIO 1 .......... Stereo mini x1
AUDIO 2 ..................... RCA x2
Audio output:
AUDIO OUT ...
Stereo mini x1
Video input:
COMPONENT VIDEO
(Y,
C
B
/P
B,
C
R
/P
R
) ...... RCA x3
S-Video ................................
1
Video ....................................
1
Communication port:
CONTROL ............D-sub 9pin x1
USB ....................... USB(B) x1
LAN .......................... RJ-45 x1