Filter
Top Products
23
• May not function properly with some input signals.
• This function takes about 10 seconds to display an image.
NOTES
ADJUSTING SCREEN WITH ONE-TOUCH
1
Press the ONE TOUCH button
You can activate the following functions just by
pressing the ONE TOUCH button:
(1) Signal search: Cycle through input signals, displaying
the images of retrieved signals. If no signal is found,
returns to the signal that was selected before the search
was begun.
(2) Automatic adjustment: In RGB mode, automatically
adjust the picture position and size; for VIDEO input,
automatically select the signal mode. ( )
(3) Automatic keystone distortion correction:
This is only
performed if ONE TOUCH of the AUTO menu is set to
TURN ON. When performed, the unit automatically corrects
vertical keystone distortion due to the (forward/backward)
setup angle of the main unit. (Vol.2 )
•
When BNC (RGB) is selected:
RGB BNC(RGB) DVI
S-VIDEO VIDE
O
COMPONENT VIDEO
RGB BNC(COMPONENT) DVI
S-VIDEO VIDE
O
COMPONENT VIDEO
•
When BNC (COMPONENT) is selected:
DOWN
BLANK
ASPECT
PUSH
LASER
FOCUS
ENTER
ON
OFF
ESC MENU RESET
POSITION
MAGNIFY VOLUME
MUTE
WIRELESS KEYSTONE
FREEZE
ONE TOUCH
AUTO
PinP
ZOOM PAGE
ONE TOUCH
Downloaded from www.Manualslib.com manuals search engine