Filter
Top Products
43
Item Description
SERVICE
REMOTE FREQ.
8VHWKHŸźEXWWRQWRFKDQJHWKH3URMHFWRUVUHPRWHVHQVRU
setting (
16).
1:NORMAL
Ù
2:HIGH
Items with a checkmark are on. The factory default setting is for
both 1:NORMAL and 2:HIGH to be on. If the remote control does
not function correctly set the this to either only 1 or only 2 as
described in Remote Control Settings (
16).
Neither can be turned off at the same time.
INFORMATION
Selecting this item displays a dialog titled “INPUT INFORMATION”.
It shows the information about the current input.
INPUT-INFORMATION
RGB
1024x768 @60Hz
FRAME LOCK
INPUT-INFORMATION
S-VIDEO
SECAM
AUTO
INPUT-INFORMATION
COMPONENT
576i @50
SCART RGB
• The “FRAME LOCK” message on the dialog means the frame lock
function is working.
• The “SCART RGB” message means the COMPONENT VIDEO
port is working as a SCART RGB input port. Please refer to the
COMPONENT item in this menu. (
33)
• This item can't be selected for no signal and sync out.
FACTORY RESET
6HOHFWLQJ5(6(7XVLQJWKHEXWWRQŸSHUIRUPVWKLVIXQFWLRQ%\
this function, all the items in all of menus will collectively return to
the initial setting. Note that the items LAMP TIME, FILTER TIME,
LANGUAGE and OPTION_SECURITY are not reset.
RESET
Õ
CANCEL
OPTION Menu (continued)
OPTION Menu