Filter
Top Products
ENGLISH
30
PRODUCT SPECIFICATIONS (continued)
• The type of video board or connecting cable used may not allow for correct displays adjustment of
H.POSITION, V.POSITION, CLOCK and PHASE.
• The monitor may fail to display an animation image correctly when a signal having a vertical frequency
of 85Hz or higher is input to it.
• The monitor differentiates the signal modes according to the horizontal and vertical frequencies and the
horizontal and vertical sync signal polarities. Note that different signals having all these elements alike
may be handled as the same signal.
• Displaying images with more than 512 lines of vertical resolution at Full diplay (compressed display) can
result in the interpolation of stripes.
• Use of this monitor with the input signal timings specified below is recommended. A predefined setting
may not be reproduced correctly with an extremely long front porch or back porch or with an extremely
short data display time.
Front porch Sync width Back porch Blanking width
Horizontal
timing
Horizontal frequency
24 kHz to 52 kHz
0.2 µs or more 1.0-4.0 µs 1.2 µs or more 3.5 µs or more
Horizontal frequency
52 kHz to 107 kHz
0.2 µs or more 0.8-3.0 µs 1.1 µs or more 2.3 µs or more
Vertical timing 9 µs or more 25 µs or more 400 µs or more 450 µs or more
No.
Signal mode
Horizontal
frequency (kHz)
Dot clock
frequency (MHz)
Remarks
Signal Name Resolution
Vertical
frequency (Hz)
1
NTSC
NTSC-4.43
M-PAL
525 59.94 15.73 -
2
PAL
N-PAL
SECAM
625 50.00 15.63 -
No.
Signal mode
Horizontal
frequency (kHz)
Dot clock
frequency (MHz)
Remarks
Signal Name Resolution
Vertical
frequency (Hz)
1 480/60i 480 59.94 15.73 -
2 575/50i 575 50.00 15.63 -
3 480/60p 480 59.94 31.47 -
4 720/60p 720 59.94 44.96 -
5 1080/60i 1080 60.00 33.75 -
6 1035/60i 1035 60.00 33.75 -
Composite / S input (VIDEO 1 input)
Component input (VIDEO 1 input)
Recommended Signal List (continued)