Filter
Top Products
3-8
2. Placing the Original
Chapter 3
Making Copies
This is the mode in which you insert your originals one by one into the Document Handler to make a
copy or copies from it. When you insert the original, the copier automatically starts the copy cycle.
NOTES
• Originals appropriate for the SADF Mode.
Type : Plain paper
Thickness : 35g/m
2
to 157g/m
2
Size : A3L to A5L
• The following features will be cancelled when using the SADF Mode.
Auto Paper, Auto Zoom, Staple Mode, Punch Mode, Folding Options Mode, 2-sided Original Mode,
Book, Dual Original Scanning Mode, 4-in-1 Mode, Booklet Creation, Cover Mode, Page Insertion
Mode, OHP Interleaving Mode, File Margin Mode, Image Repeats, Mixed Orig. Detection and Free
Orig. Placement.
Open the Single Feed Tray and slide the
Guide Plate to the size of the original.
Make sure that the Scan Lamp and Print
Lamp of the Start Key are lit green and insert
the original face down into the Tray.
NOTES
• Be sure to place one original at a time.
• Be sure to correct any fold or curl in the
original beforehand.
The original is automatically taken up and
the copy cycle is started.
Making sure that the Scan Lamp and Print
Lamp of the Start Key lights up green again,
insert the next original.
Using the SADF Mode
1
1155O029AA
2
1155O756AA
3
4