Honeywell 3800gHD Scanner User Manual


 
3800g/3800gHD/3800gPDF User’s Guide 7 - 17
UPC A
<Default All UPC A Settings>
UPC A
UPC A Check Digit
This selection allows you to specify whether the check digit should be transmit-
ted at the end of the scanned data or not. Default = On.
UPC A Number System
The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will not
transmit it.
Default = On.
* On
Off
* On
Off
Off
* On