Filter
Top Products
5
Interface
Scan the barcode that describes the PC or interface you are using.
Aligning the Document Reader Tray
Proper cable placement is important for accurate alignment of the device.
Place the cable in the wire channel if the imager will remain in the base most of
the time. If you plan to frequently lift out the imager to scan items, then set the
cable in the location where it will rest while the imager is in the stand.
Note: The 4800dr will not capture any images until it has been properly aligned
using the following procedure.
1. Loosen the screw in the base tray with a coin.
2. Place the alignment page on the tray. Align the upper left corner of the
alignment page to the upper left corner of the tray.
USB Keyboard (PC)
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID Barcode Reader
USB COM Port Emulation
TTL-232 Interface