Filter
Top Products
6
3. Make sure the serial number on the alignment page (the top number)
matches the serial number on your document reader.
4. Press the button on the imager to display the illuminated aimer crosshairs.
You will hear a single beep that indicates you are using the correct page.
(If you hear 3 beeps and the aimer turns off, then you have the wrong
alignment page for your document reader.)
5. Move the tray until the illuminated aimer crosshairs line up with the printed
crosshairs on the alignment page. (Be sure to wait until the crosshairs go off
before removing power or attempting to capture an image.)
6. Remove the alignment page and tighten the screw. Save the alignment
page in the event that the tray needs to be realigned in the future.
Note: If you need to print a new copy of the alignment page, make sure to print
the page in landscape mode.
Imaging Technique
Center a document in the document reader tray. (Smaller documents should be
centered in the pocket in the tray.) Press the button on the imager. The view
finder projects an aiming beam to indicate the image capture area.
Technical Assistance
If you need assistance installing or troubleshooting your device, please call your
distributor or the nearest technical support office:
North America/Canada
Telephone: (800) 782-4263
Fax number: (315) 554-6705
E-mail: natechsupport@honeywell.com
Latin America
Telephone: (803) 835-8000
Telephone: (800) 782-4263
E-mail: latechsupport@honeywell.com
Brazil
Telephone: +55 (21) 3535-9100
Fax: +55 (21) 3535-9105
E-mail: brsuporte@honeywell.com
Mexico
Telephone: (803) 835-8000
E-mail: latechsupport@honeywell.com
4800dr s/n
engine s/n