Filter
Top Products
12 - 3
Back Panel and Mounting Brackets
Ball Joints
There are two ball joints: one that is attached to back of the base and one on the mounting
bracket. Both ball joints are inserted into the bracket and secured to mount the base.
Pivot Bracket
The bracket contains the turnscrew and two slots. Ball joints are inserted into each slot and
secured with the turnscrew.
Turnscrew
The turnscrew is located on the side of the pivot bracket. Rotate the turnscrew to secure or
loosen the ball joint slots.
Mounting Bracket
The mounting bracket is what you attach to the mounting surface. It is comprised of a ball joint
and flat disk. The disk contains drill holes you use to secure the base to the mounting surface.
Base
Tur ns crew
Mounting Bracket
Ball Joint
Pivot Bracket
Ball Joint