Filter
Top Products
4 - 4
Using the Scan Demo
1. Tap Launcher > Demos > ScanDemo to open the Scan Demo application.
2. Point the Dolphin terminal at the bar code.
3. Tap and hold or press and hold the terminal’s SCAN key. Center the aiming beam over
the bar code; see Aiming Beam Options on page 4-9.
Note: For optimum performance, avoid reflections by scanning the bar code at a slight angle.
4. The bar code is decoded and the results appear on the screen.
Scan Demo
application
screen.
Tap to open the
Scan Demo
application.
Decode Results
Tap the dots to scroll
through the decode
results of past scans.
Scan Statistics
See Configuring the Scan
Demo Application on page 4-6.