Honeywell Demos Scanner User Manual


 
Dolphin® Demos User’s Guide Rev A
8/6/08
2 - 1
2
Imaging Demo
Overview
The Imaging Demo demonstrates the imaging functionality of the on-board image engine, such as picture
formatting, saving and printing.
To Capture Images
1. Tap Start > Demos > Imaging Demo. The Imaging Demo opens.
The screen is blank until you press the SCAN key.
2. Press the SCAN key to activate the image engine. A preview of the image appears on the screen.
The previewed image has a degraded appearance. This is normal. The previewed image is not the
same as the captured image; the captured image will not have the same degradation.
3. Release the button or trigger. The captured image appears on the screen.
To Save Images
You can save images two ways: Save and Save As. Save saves one image with a default name. Save
As allows you to determine the image parameters.
Save
Tap File > Save. The image remains on the screen and is saved as a grayscale .jpg with the name
“imagedemo.jpg” in the My Device folder (\IPSM).
Note: If you take another image and tap File > Save. The new image will save over the existing imagedemo.jpg file.
OR
Save As