Honeywell HMLCD19 Computer Monitor User Manual


 
Rev. A 12 HMMU000882
04/09/04
3.2 PRESET MODE CHART
Timing Charts
The monitor shall be capable of supporting the following video
timings:
VIDEO
SYNC
Synch Width (T2)
(T3) Back Poach
(T1) Period
(T4) Active
(T5) Front Poach
Input Timing Limits
H-Sync Pulse Width 1.0 µs Sync Pulse Width 8.0 µs.
V-Sync Pulse Width 0.04 ms Sync Pulse Width 0.5 ms.
NOTE: The width of Sync Pulse is out of input timing range,
the monitor may operate abnormally. Check Sync
Pulse Width of Input Timing.
Input Level Limits
Low level: 0.4V (Max)
High level: 2.4V (Min)
NOTE: For better quality display image, use the timing and
polarity shown in the preset mode table. Refer to your
video card user guide to ensure compatibility.
Rev. A 1 HMMU000882
04/09/04
SECTION 1:
INTRODUCTION
1.1 INTRODUCTION
Honeywell's HMLCD19 SXGA Color LCD Display features a 19"
viewable active matrix LCD screen, with outstanding 1280 x
1024 pixel resolution. When used in PC based applications the
HMLCD19 provides connection points for VGA, PC Sound, and
Headphones. CCTV applications are supported by input
connections for audio, Y/C (S-Video) and composite video
sources while providing a flicker free viewing experience not
normally experienced with traditional CRT-type monitors. Easy
to access front panel OSD display controls including direct
contrast, brightness, volume and mute control buttons along
with single button source selection for quick and easy
adjustments.
1.2 FEATURES
SXGA (1280 x 1024) resolution LCD module
16,777,216 Color Display
DPMS (Display Power Management Signaling)
OSD (On-Screen Display) controls
Multi-language OSD Menu
Utilizes DDC1/2B controls. The system will perform Plug &
Play feature if both monitor and host system support
DDC1/2B protocol.
Internal speakers