Filter
Top Products
Important Information About this Guide
The Belt Mounted Sled is a device that is used with the wearable version of
the Dolphin 70e Black (Honeywell Wearable Solution). For information about
the Dolphin 70e Black, refer to the quick start packaged with the terminal.
This document is designed to assist the user who is wearing the wearable
Dolphin 70e Black on a belt.
Out of the Box
A typical Honeywell Wearable Solution belt mount accessory kit contains the
following items (may be packaged separately):
• Belt mount sled
• Belt clip assembly
• Headset adapter cable
• Headset
• Bluetooth ring scanner (optional)
• Quick Start Guide
The Dolphin 70e Black terminal and other accessories are packaged
separately. Be sure to keep the original packaging in case you need to return
the Dolphin 70e Black or accessories for service.
Initial Use Overview
When preparing for initial wearable use, insert a fully charged battery and
follow the steps in this guide to assemble the wearable sled and mount the
assembly on a belt. When finished, press the spring clip to remove the
assembly from the belt.
Subsequent Use Overview
For subsequent use, it may be necessary to remove the terminal from the sled
before changing the battery, then reassemble the sled and mount the
assembly on a belt. When finished, press the spring clip to remove the
assembly from the belt.