Filter
Top Products
5. If the scan wedge icon is displayed, scan wedge is running. If the scan
wedge icon is not displayed, Touch > Power Tools > ScanWedge
NGW. Tap Yes if a message is displayed about continuing without a
tethered scanner connected.
Placing Dolphin 70e Black into the Sled
1. If the end cap is installed on the
sled, slide the lock down to release
the end cap.
2. Push up on the right side (the side with the lock) of end
cap. Do not attempt to remove the end cap without
sliding the lock first!
EZ Pairing icon
Scan Wedge NGW icon