Filter
Top Products
13
INSTALLATION
UNPACKING THE UNIT
1. Make sure the shipping box is top-side up before opening.
2. Remove the accessories box and check the box’s content for the
following items:
• Product Manuals
• Power Supply
• Communication Cables
3. Lift the scanner out of the shipping box by gripping the bottom of
the unit on both sides.
Important! Do not lift the unit out of the box by gripping the sides
of the platter.
4. Carefully remove the shipping foam around the unit.
Important! Do not turn the unit upside down or tilt the unit onto its
side while removing the shipping foam. The platter is
not attached to the unit and can fall off!
5. Lift the platter off the unit and store it in a safe location until
the unit is installed in the checkout counter.
Figure 14
Figure 15
Figure 16
Figure 17