Honeywell TE218ELW Clock User Manual


 
98
LANGUAGE SETTING
The weekday may be displayed in one of five languages:
English, Spanish, French, German, or Italian
1. After the minute is set, press MODE, and the weekday
display will indicate the current preset language, “EN”
for English.
2. Press or to set the desired language for the weekday
display. The selection sequence is “EN” for English, “SP”
for Spanish, “FR” for French, “GE” for German, and “IT”
for Italian.
˚C or ˚F TEMPERATURE DISPLAY SELECTION
1. When the language of weekday is set, press MODE.
2. “˚F” will flash prompting the Fahrenheit display.
3. Press or to select desired temperature display: “˚F”
for Fahrenheit or “˚C” for Celsius.
Use the ALARM ON/OFF button:
* To view the weekday alarm, single alarm or the pre-alarm.
* To set the alarm times.
* To turn off any alarm.
CALENDAR CLOCK DISPLAY MODES
Both an alarm time and the calendar share the same
section of the LCD display. The next line displays the current
time with seconds and the day of the week. The calendar is
displayed in the month and day format. If the alarm time is
displayed, press MODE to display the calendar in month-day
format. Each press on the MODE button will change the
display between the time with the seconds and the time with
the day of the week.
DATE AND TIME SETTING
1. Press MODE button to change
to the Hour/ Minute/ Weekday display. Select the Time
Zone by pressing and holding the button for 3 seconds.
Keep holding until the desired time zone (Pacific, Mountain,
Central or Eastern) is displayed. A dark section on the
map indicates the time zone selected.
2. Press and hold MODE for 3 seconds: The year digit will
flash. Press or to select the year.
3. Press MODE again: The month digit will flash.
Press or to select the month.
4. Press MODE again: The date digit will flash.
Press or to select the date.
5. Press MODE again: The “12 Hr” digit will flash to
prompt for 12 or 24 hour display format. Press or
to select 12 or 24 Hr.
6. Press MODE again: The hour digit will flash.
Press or to select the hour.
7. Press MODE again: The minute digit will flash.
Press or to select the minute.
EXIT THE MANUAL SETTING MODES
* When the temperature display is set, press MODE to return
to the default hours, minutes and seconds display.
* If no key is pressed for 30 seconds, the unit will return to
default time display.
VIEWING THE ALARM TIME SETTINGS
There are 3 different alarms available: Weekday alarm, Single
alarm and the Pre-alarm.
* Weekday Alarm
The alarm will sound and alarm icon “ ” will flash at the
set time, Monday through Friday.
* Single Alarm
The alarm will sound and the alarm icon “ ” will flash at
the set time. Once it is finished, it will be disabled automatically.
This is useful for weekends, holidays or any day when you wish
to wake at a time other than your normal weekday alarm time.
There is no need to reset your regular alarm time. This alarm
can be bypassed during the set up if you choose not to use it.
W
S