Filter
Top Products
5 - 21
Options
Windows Embedded Standard 2009
Start > Control Panel > Options (Classic view)
Windows Embedded Standard 7, Windows 7 Professional
Start > Control Panel > Options (Large or Small Icon View)
5V on COM1
By default, Pin 9 of COM1 provides +5V, such as for an external scanner tethered to the COM1 port. Uncheck this box
to configure Pin 9 of COM1 to provide RI.
5V on COM2
By default, Pin 9 of COM2 provides +5V, such as for an external scanner tethered to the COM2 port. Uncheck this box
to configure Pin 9 of COM2 to provide RI.
Touch Screen Disable
By default, this option is unchecked and the touch screen is enabled. If this option is checked, it may be necessary to
attach an external keyboard or USB mouse to access this screen to re-enable the touch screen unless a
Programmable Key (page 5-38) has been assigned to enable the touch screen.
Note: Tapping Apply disables the touch screen but does not dismiss this panel. The panel must be dismissed via an
external keyboard or mouse. This panel is dismissed when the OK button is tapped after selecting Touch Screen
Disable.
Keyboard Backlight
By default, the integrated keyboard backlight follows the display backlight. Uncheck this box to turn the keyboard back-
light off regardless of the display backlight status.
USB Powered in Standby or Sleep
Standby mode is supported for a Thor VM2 with a Windows Embedded Standard 2009 OS. Sleep mode is supported
for a Thor VM2 with either a Windows Embedded Standard 7 or a Windows 7 Professional OS.
By default, power is removed from attached USB devices when the Thor VM2 is in Standby or Sleep mode. Check this
box to maintain power to attached USB devices in Standby. or Sleep
Windows Embedded Standard 2009
Windows Embedded Standard 7
Windows 7 Professional