Filter
Top Products
12
6.3 Setting Up a Wi-Fi Connection through
the WPS
If the client to which your router connects supports WPS, a network key is
generated automatically.
To set up a WPS connection:
1. Ensure that is steady on.
2. Press and hold until blinks to activate the WPS
connection on your router.
3. Activate the WPS connection on the client.
For details about the client's operations, see its user guide.
7 Accessing the Internet
After a connection between your router and the client is set up, you can
access the Internet using the modes listed in the following table.
Select an appropriate mode according to your data service charging plan.
For example, if you are charged according to the length of time you are
connected to the Internet, it is recommended that you select manual mode.
For details about your data service charging plan, contact your service
provider.
Mode Description
Auto After being functioned on, the router will automatically
connect to the Internet. Once connected, the router will
not automatically disconnect from the Internet.
Manual Log in to the web management page, and then
connect to or disconnect from the Internet as
prompted.
On
Demand
After being functioned on, if there is data being
transferred, the router will automatically connect to the
Internet. If no data is transferred within a pre-defined
period, the router will automatically disconnect from
the Internet.