Filter
Top Products
4
• PHONE: Connect to the telephone sets;
• MODEM: Connect the ADSL port of MT880.
Ethernet NIC
Computer is connected to MT880 through the Ethernet port on MT880.
Ensure your computer is configured with NIC adapter as well as Ethernet
port. Besides, be sure to enable the TCP/IP protocol for your operating
system.
User Name and Password
For PPP connections you have to keep user name and password to connect
to your ISP.
Connect MT880
Place MT880 in a safe and accessible location where you can easily view
the LED indicators on the front of the device.
Note: If you want to connect one or more telephones, a spliter is
needed that works between telephones and the line from phone
Jack. For more details about connecting multiple telephones,
please refer to the FAQs.
You are now ready to connect MT880. Follow these steps:
1.
Connect the ADSL line –
Method one: Plug one end of the twisted-pair ADSL cable into the
ADSL port on the rear panel of MT880 and insert the other end into
the wall socket.
Method two: Plug one end of the twisted-pair ADSL cable into the
ADSL port on the rear panel of MT880 and insert the other end into
the MODEM port of the external splitter. In this way, a telephone set
can be connected to the PHONE port of the splitter. The user can
access the Internet and make calls at the same time. Please refer to
the figure 4 for more information.
2.
Connect MT880 to your computer - Use the Ethernet cable provided to
connect MT880 and your computer or notebook PC through those
10/100Base-TX Ethernet ports.
3.
Connect the power adapter - Use the power adapter supplied and plug
it into a suitable power source. You should see the Power LED indicator
light up and remain lit.
When the LAN LINK LED of MT880 is on, it indicates the connection between
MT880 and your PC is okay.