Hypercom ICE 5700 Credit Card Machine User Manual


 
Chapter 1
1-2 ICE 5700 Hardware and Installation Operators Manual 940310-001, rev. A
General Safety Precautions
This section describes general safety precautions that must be followed to ensure proper installation
and maintenance of the POS product family.
CAUTION
Electrical Safety: Observe all normal electrical safety practices when operating any equipment attached to
an active power source.
Authorized Service: Only a Hypercom authorized service technician or an authorized repair station can
perform
equipment servicing, adjustment, maintenance, or repairs on the POS products.
Electrostatic Damage: Before performing any maintenance on POS products, ensure that you wear a
static strap and are grounded to the POS products.
To ensure protection of the telecommunications port against lightning damage, this product requires
connection to the building protective earthing. Therefore, the integrity of protective earthing must be
ensured. Use only the Hypercom provided power supply and power cord. Ensure that power is supplied
from a suitable power outlet to the supply when the terminal is connected to the telephone line.
WARNING
Electromagnetic Compatibility: This is a Class A product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to take appropriate measures.
Danger of explosion: If the battery is installed incorrectly, it could explode. Replace only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries according to the
manufacturer instruction.