Filter
Top Products
Argecy Computer Corporation 248-324-1800
132
NPA Hosts
Purpose:
To specify the maximum number of NPA hosts that can register for NPA alerts.
Values:
Note: Changing this menu item automatically resets the printer.
NPA Mode
Purpose:
To specify whether the printer performs the special processing required for bidirectional
communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.
Values:
Note: Changing this menu item automatically resets the printer.
PCL SmartSwitch
Purpose:
To configure the printer so it automatically switches to PCL emulation when a print job received
through the LocalTalk port requires it, regardless of the default printer language.
Values:
See also:
PS SmartSwitch; Printer Language
1...10 (2*)
On Printer performs NPA processing. If data is not in NPA format, it is rejected as bad data.
Off Printer does not perform NPA processing.
Auto* Printer examines the data to determine the format and then processes it appropriately.
On* Printer examines data on the LocalTalk interface and selects PCL emulation if the data
indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PostScript emulation to
process the job if PS SmartSwitch is On, or uses the default printer language specified in the
Setup Menu if PS SmartSwitch is Off.