Filter
Top Products
Argecy Computer Corporation 248-324-1800
77
28
Solving option problems
If an option does not operate correctly after it is installed or if it quits working:
• Make sure paper options are marked with a colored triangle, indicating they are compatible
with your printer.
• Turn the printer off, wait for about 10 seconds, and turn the printer on. If this does not fix the
problem, unplug the printer, and check the connection between the option and printer.
• Print the menu settings page and check to see if the option is listed in the Installed Options list.
If the option is not listed, reinstall it.
• Make sure the option is selected in the software application you are using.
For Macintosh computer users: Make sure the printer is set up in Chooser.
Printer options are listed below with suggested corrective actions for related problems. If the
suggested corrective action does not fix the problem, call your service representative.
Options Action
Drawers • Make sure the connection between drawers (250-sheet drawer, optional 500-
sheet drawer, or optional 2000-sheet drawer), or the connection between a drawer
and a duplex unit or the printer, is secure.
• Make sure the print material is loaded correctly. See
Loading print material for
more details.
Duplex unit • Make sure the connection between the duplex unit and the printer is secure. If the
duplex unit is listed on the menu settings page, but print material jams when it
enters or exits the duplex unit, the printer and duplex unit may not be properly
aligned.
• Make sure the duplex front access cover is securely installed.
Envelope feeder • Make sure the connection between the envelope feeder and the printer is secure.
• Make sure the Paper Size setting is correct in both the Paper Menu and in the
software application.
• Make sure the envelopes are loaded correctly. See
Loading the envelope feeder
for more details.
Flash memory Make sure flash memory is securely connected to the printer system board.
Hard disk with adapter Make sure the hard disk is securely connected to the hard disk adapter card. Also
make sure the hard disk adapter card is securely connected to the printer system
board.