Filter
Top Products
- 11 -
2
2 INSTALLATION
This chapter explains how to install your print server and connect it to the
network. It also describes the automatic power-on-self-test (POST).
Installing the Print Server
Follow these steps for a trouble-free start of print server operations with your
1-Port USB Print Server. Please take particular notice of the warning in step
4: the network connection should be made before supplying power to the
print server.
1. Confirm proper operation of the printer to be connected to the print server.
2. When you have confirmed proper operation of the printer, turn off the
power.
3. Confirm that your network is operating normally.
4. Connect the print server to the network (through the RJ-45 connector of
the print server).
WARNING: Configuration problems may result if the print server is
powered up without first establishing its network connection. Please
follow this procedure to avoid complications at the configuration stage.
5. While the printer is powered off, connect the print server through the
cable to the printer’s USB port.
6. Turn on the printer’s power.