Filter
Top Products
- 9 -
Rear View
Component Description
DC Power
Input
The DC power input connector is located on the
Print Serv
er’s rear panel and is labeled DC 5V.
Please note that the power supply included in the
package is correct for this 1-Port USB Print Server;
substitution of other equipment may void
warranty.
Reset Button
1.) Press and release this button to reset the print
server.
2.) Press and hold this button for three seconds
(the USB LED on the front panel lights up)
and then release it, the print server will
resume the factory default settings.
LAN
Connector
This LAN connector (RJ-45) provides the printer
server with connection to the network through
10/100 TX Ethernet cabling.
This printer port is configurable by commands in the PS Admin program, or by
commands issued to the print server via Telnet. See the PS Admin User’s
Guide for configuration procedures. The print server also supports web
configuration, which allows users to configure settings through the web
browser. The print server’s default IP address settings are:
♦ Default IP address – 192.168.0.1
LAN Power
Reset Button