Filter
Top Products
No Yes
↓ Verify that the card you moved is listed on the Packaging
Hardware Resources menu.
If a resource is missing (look for a ?) because an adapter card was
moved, do the following:
1) On the line that has the question mark, type a 4 in the Opt
column to remove the resource from the configuration.
2) Press the Enter key.
3) When Confirm Remove of Packaging Hardware Resources(s)
appears, press the Enter key.
4) If you move an adapter card, or replace an adapter card with
another adapter card, you need to change the Resource Name.
For information on changing resource names, go to AS/400
online information, or the Basic System Operation,
Administration, and Problem Handling, SC41-5206-04.
5) Go to step 9.
__ 9. Print the configuration list, if you have a printer.
Note: To print the configuration list, press F6 on the Packaging Hardware
Resources menu.
Place the configuration list in the Basic System Operation, Administration, and
Problem Handling, SC41-5206-04 book.
__ 10. To return to the AS/400 Main menu, press F3 three times and then press
the Enter key.
__ 11. For information on how to make your card operational, go to the AS/400
Information Center. You can access the Information Center from the AS/400
Information Center, SK3T-2027-03 or from the following Web site:
http://www.as400.ibm.com/infocenter
__ 12. Your feature upgrade is complete. Keep all miscellaneous parts, such as
wrap connectors, in a safe place.
10 AS/400e 170 or 250 2809 or 2824 LAN/WAN Workstation Card V4R5